Tools For Laminate Flooring: What You Need To Get The Job Done

By | May 28, 2023

SKIL 360102 Flooring Saw with 36T Contractor Blade Best laminate, Laminate

Laminate flooring is a popular choice for many homes, and with good reason. It offers a stylish and durable look, and can be installed quickly and easily. But to ensure a successful installation, you’ll need the right tools. Here, we’ll look at the essential tools for laminate flooring and how to use them to get the job done right.

Measuring Tape and Pencil

The first step in any flooring project is to measure the area and plan your layout. To do this, you’ll need a measuring tape and a pencil. Measure the length and width of the room and draw a simple diagram, including any odd-shaped areas. Make sure to leave a small gap between the walls and any furniture to allow for expansion. Once you’ve got your measurements and layout, you’ll be ready to start shopping for the right materials.

Saw

Once you have your materials, you may need to cut them to size. For this, you’ll need a saw. The most common type of saw used for laminate flooring is a circular saw, though you may also need a jigsaw or a miter saw. Depending on the type of saw you have, you may need to buy special blades, so make sure to check your saw’s instructions first.

Mallet

You’ll also need a mallet to help you fit the planks together. The mallet helps to ensure a tight fit and helps to prevent any gaps between the planks. If you don’t have a mallet, you can use a rubber hammer or a piece of scrap wood.

See also  Everything You Need To Know About A Laminate Floor Calculator

Pull Bar

A pull bar is a must-have for any laminate flooring installation. This tool is used to help you fit the planks together more tightly. It also helps to prevent any gaps between the planks and keeps the floor looking neat and professional. Make sure to get a pull bar that’s the right size for your planks.

Tapping Block

The tapping block is used to tap the planks together. It helps to protect the edges of the planks and prevents any chipping or damage. If you don’t have a tapping block, you can use a piece of scrap wood or a rubber hammer.

Laminate Flooring Spacers

Laminate flooring spacers are essential for keeping the planks at a consistent distance apart. These spacers are made of plastic and come in various sizes. Make sure to use the right size spacers for your laminate flooring. If you’re not sure, you can ask a professional for assistance.

Conclusion

Laminate flooring is a popular choice for many homes. To ensure a successful installation, you’ll need the right tools. These include a measuring tape, pencil, saw, mallet, pull bar, tapping block, and laminate flooring spacers. With the right tools, you can get the job done quickly and easily.

Laminate Flooring Installation Tools Needed LAMINATE FLOORING

Laminate Floor Cutter 150810, Hand Tools & Tool Sets at Sportsman's Guide

Wood, Laminate & Vinyl Tools Roberts Consolidated

7 Best Laminate Floor Cutters That Cut Laminates Quickly and Easily

laminate flooring cutter tool

Wood Flooring Tools / Professional Flooring Jack Install Hard Wood Straight Tile Contractor Hand

SKIL 360102 Flooring Saw with 36T Contractor Blade Best laminate, Laminate

Top 10 Best Laminate Flooring Tools Top Reviews No Place Called Home

8" Laminate Cutter Roberts Consolidated

9 Inch Laminate Floor Cutter for Tile Wood Fiber Cement Flooring Cutting Tool eBay

**See Note** Norske Tools Newly Improved NMAP001 13 inch Laminate Flooring and Siding Cutter

Bullet Tools 13 in. Magnum Laminate Flooring Cutter for Pergo, Wood and More913 The Home Depot

Wood Flooring Laminate Installation Floor Fitting Kit Set Tool Wooden DIY Home eBay

Bullet Tools 9 in. Magnum Laminate Flooring Cutter for Pergo, Wood and More909 The Home Depot

Laminate Floor Cutter Flooring Cutting Tool Wood Saw Vinyl Tile Guillotine Blade 40053335117 eBay


Leave a Reply

Your email address will not be published. Required fields are marked *