Replacing laminate floor planks can be a great way to update the look of your home without spending a fortune. Even though it may seem intimidating, replacing laminate floor planks is a relatively easy task that anyone can do. Here is a step-by-step guide to help you get the job done right.
Step 1: Prepare the Area
The first step when replacing laminate floor planks is to prepare the area. Make sure to clean up any debris or dirt around the area where you will be replacing the planks. It’s also important to make sure the area is level and all of the pieces fit together properly.
Step 2: Remove the Old Plank
Once the area is prepared, you can begin to remove the old plank. Use a hammer and chisel to loosen the old plank from the subfloor. Carefully remove the plank and make sure to save the pieces for later use.
Step 3: Measure and Cut the New Plank
Next, take the measurements of the area where the new plank will be installed. Measure the length and width of the plank and adjust it to fit the area. Once you have the measurements, use a saw to cut the plank to the desired size.
Step 4: Install the Plank
Now you can start to install the new plank. Start by applying glue to the subfloor and place the plank on top. Make sure to press down firmly on the plank to ensure it is securely in place. Once the plank is installed, you can use a rubber mallet to make sure it is flush with the other pieces.
Step 5: Finishing Touches
Once the plank is installed, you can add the finishing touches. Use a putty knife to spread the glue around the edges of the plank for a seamless finish. You can also use a damp cloth to wipe away any excess glue and make sure everything looks neat. Finally, use a roller to press down firmly on the plank and ensure a tight bond.
Step 6: Clean Up
After the plank is installed, don’t forget to clean up the area. Vacuum the area to remove any dust or debris and make sure the plank is free of any dirt or particles. Once the area is cleaned up, you can sit back and admire your new laminate floor plank.