Tips For Trimming Laminate Flooring

Laminate flooring is a great option for homeowners looking for a durable, long-lasting flooring solution. It’s also relatively easy to install and maintain, although it does require some trimming to fit around door frames, walls, and other obstructions. Here are a few tips on how to trim laminate flooring correctly.

Measure and Mark the Cut

The first step in trimming laminate is to measure and mark the cut. Measure the space that needs to be filled with the laminate and then mark it on the back of the laminate plank. Use a straight edge and a pencil to draw a line. Be sure to double-check the measurements to make sure they are correct.

Cutting the Laminate

Once the cut is marked, it’s time to cut the laminate. A jigsaw is the best tool for the job, as it will provide a clean, precise cut. When you’re cutting the laminate, make sure to follow the line you drew and keep the saw blade perpendicular to the board. Don’t rush the cut, and make sure to keep the saw steady and level.

Sanding the Cut Edge

Once the cut is made, you’ll need to sand the edge of the laminate to make sure it’s smooth and free of splinters. Use a fine-grit sandpaper and sand the cut edge until it is smooth. Be sure to wipe away any sawdust as you go.

Trimming the Sides

Once the edge is sanded, you’ll need to trim the sides of the laminate. This will ensure the planks fit together properly and the floor looks even. Use a handsaw or jigsaw to carefully trim the sides of the laminate plank. Be sure to measure twice before you make the cut.

Fitting the Planks

Once the trimming is complete, it’s time to fit the planks together. Make sure the edges line up perfectly and that the planks fit snugly together. If there are any gaps, you may need to trim the plank again or use a filler to fill the gap.

Finishing Touches

Once the planks are fitted together, you’ll need to add the finishing touches. You may need to add a trim piece to the edge of the laminate to give it a more finished look. You should also use a sealant to protect the floor from water damage. Finally, add any additional decorations or furniture as desired.

Conclusion

Trimming laminate flooring is relatively straightforward, but it is important to take the time to measure and mark the cut correctly. Once the cut is made, use a jigsaw to make the cut and then sand the edges for a smooth finish. Finally, fit the planks together and add any finishing touches. With the right tools and techniques, you can trim laminate flooring with ease.