Tools For Vinyl Plank Flooring: Tips For Diyers

By | December 2, 2022

LifeProof Luxury Vinyl Plank Flooring

Vinyl plank flooring is a great way to add style and value to your home. But, to make sure that the installation looks great and lasts, you’ll need to have the right tools on hand. In this article, we’ll discuss the tools you’ll need for a successful installation of vinyl plank flooring.

Tape Measure

Before you start installing your vinyl plank flooring, you’ll need to measure the room to get an accurate estimate for how much material you need. A tape measure is one of the most important tools you’ll need for this job. Make sure you get one that is at least 10 feet long, as this will come in handy for larger rooms.

Utility Knife

You’ll need a utility knife to cut the vinyl planks to size. Make sure you have a few extra blades on hand, as you’ll likely go through a few when cutting the planks. You can also use a power saw to make the cuts, but a utility knife is often the easiest and quickest way to make the cuts.

Mallet or Hammer

Once you’ve cut the planks to size, you’ll need to tap them into place. For this, you’ll need either a mallet or a hammer. A mallet is often the preferred tool for this job, as it will help protect the vinyl from dents and scratches. If you don’t have a mallet, a hammer will do in a pinch.

Tapping Block

A tapping block is an essential tool for vinyl plank flooring installation. It helps you keep the planks in place and prevents them from shifting while you’re tapping them into place. You can buy a tapping block at any home improvement store, or you can make one yourself with a piece of scrap wood.

See also  Fun Vinyl Flooring: Get Creative With Your Home Design

Carpenter’s Square

A carpenter’s square will come in handy when you’re installing your vinyl plank flooring. It will help you make sure that the planks are lined up properly and that the corners of the room are square. If you don’t have a carpenter’s square, you can use a straight edge or a level to achieve the same effect.

Vacuum Cleaner

Once you’ve installed the vinyl plank flooring, you’ll want to make sure that you clean up any debris that was left behind. A vacuum cleaner is the best tool for this job. You can use a regular vacuum cleaner or an industrial-strength model if you have one. Be sure to make sure that the area is completely free of dust and dirt before you start putting the furniture back in place.

Conclusion

Installing vinyl plank flooring is a great way to add style and value to your home. To make sure that the installation process goes smoothly, you’ll need to have the right tools on hand. A tape measure, a utility knife, a mallet or hammer, a tapping block, a carpenter’s square, and a vacuum cleaner are all essential tools for this job. With these tools, you’ll be able to complete your vinyl plank flooring installation in no time.

Cutting Vinyl Plank Flooring With A Table Saw

Vinyl Plank Flooring Installation Kit Laminate Wood Floor Tapping Block Spacers 680580525881 eBay

LifeProof Luxury Vinyl Plank Flooring

The List of Vinyl Flooring Tools (Preparing, Planning, Laying and Cleaning)

Pro Flooring Installation Kit For Vinyl, Laminate And Hardwood Flooring

12 in. Vinyl Plank Tile VCT Repetitive Cutter Ruler Cutting Guide Flooring Tool 75378108955 eBay

Vinyl flooring cutter LVT330 ,13 inch LVT, VCT, Vinyl tile cutter. YouTube

MantisTol 20inch Pro Flooring Cutter MC510,For Laminate, Carpet tile, Siding,Rigid Core Vinyl

Buy Free Shipping, Flooring Tools Vinyl Flooring Weld Kit & Installation Tools

DCT Hardwood Plank Jack Vinyl Flooring Tools Installation Wood Floor Jack

Vinyl Plank Flooring Installation Kit Laminate Wood Floor Tapping Block Spacers 680580525881 eBay

Wood, Laminate & Vinyl Tools Roberts Consolidated

Roberts 12 in. Pro Grade VCT Vinyl Tile and Luxury Vinyl Tile Cutter up to 1/8 Thickness10900

China Vinyl / Lvp Flooring Cutter Ep180 by Mantis Tool China Vinyl Flooring Cutter, Lvp

Wood, Laminate & Vinyl Tools Roberts Consolidated


Leave a Reply

Your email address will not be published. Required fields are marked *