How To Do Laminate Flooring

Laminate flooring is a great option for those looking for an affordable, stylish, and durable flooring option. It is perfect for busy households with children and pets, and is easy to clean and maintain. Installing laminate flooring is a relatively simple process that can be completed in a few hours. Below, you will find step-by-step instructions on how to do laminate flooring.

Step 1: Measure the Room

The first step in the process is to measure the room to determine the amount of flooring needed. Measure the length and width of the room to calculate the total square footage. Then, add 10% to the total to account for any cutting and waste. Make sure you measure in feet and inches, not just feet.

Step 2: Prepare the Subfloor

Once the room is measured, the next step is to prepare the subfloor. Make sure the subfloor is clean, level, and free from any debris. If the subfloor is uneven, use a self-leveling compound to level it out. If needed, use a damp-proof membrane to protect the subfloor from moisture.

Step 3: Lay a Vapor Barrier

Once the subfloor is ready, the next step is to lay a vapor barrier. This will help protect the flooring from moisture. Use a 6-mil polyethylene sheet and cover the entire subfloor. Make sure the edges of the sheet overlap by several inches and use tape to seal the seams.

Step 4: Install the Laminate Flooring

Once the vapor barrier is installed, it is time to install the laminate flooring. Start by laying the first row of planks along the wall. Make sure the planks are flush with the wall and that the ends are cut to fit. Use a tapping block and a hammer to tap the planks together. Continue laying the planks in this fashion until the entire floor is covered.

Step 5: Install Molding and Trim

When the floor is finished, the next step is to install the molding and trim. Measure the room and cut the molding and trim to fit. Use a miter saw and a nail gun to install the baseboard. Make sure the nails are countersunk and the baseboard is level. Finally, install the door trim and finish the project.

Step 6: Clean and Enjoy

The final step is to give the floor a good cleaning. Use a vacuum and a mop to remove any dust and debris. Then, apply a floor cleaner to give the floor a nice shine. Once the floor is clean, you can enjoy your beautiful new laminate flooring.

Conclusion

Laminate flooring is a great option for those looking for a stylish and durable flooring option. Installing laminate flooring is a relatively simple process that can be completed in a few hours. By following the steps outlined above, you can easily install laminate flooring in your home and enjoy its beauty for years to come.