How To Install Vinyl Laminate Flooring

Vinyl laminate flooring is a great option for homeowners looking for a practical, stylish, and durable flooring solution. It’s easy to install and maintain, and can last for years if properly cared for. Here’s a step-by-step guide to help you install your new vinyl laminate flooring.

Step 1: Preparing the Room

Before you begin, it’s important to make sure the room is prepared properly. Start by removing all furniture, rugs, and other items from the room. Then, vacuum the floor to remove any debris or dust. If you’re installing the flooring over an existing floor, make sure to check for any loose or missing tiles. Once the room is clean and clear, you’re ready to start installing your new floor.

Step 2: Measuring and Cutting

Once the room is prepped and ready, you can start measuring and cutting the vinyl laminate flooring. Measure the length and width of the room, and add an extra 5 cm to each measurement to account for any trimming that may need to be done. Then, use a measuring tape and pencil to mark the exact measurements on the back of the vinyl laminate flooring. Once the measurements have been marked, use a saw to cut the vinyl laminate flooring to size.

Step 3: Assembling the Floor

Once the vinyl laminate flooring is cut to size, you can start assembling the floor. Start by laying the first row of planks down, making sure to line up the edges and corners. Then, use a rubber mallet to tap the planks together. Make sure to leave a gap of about 5 mm between the planks to allow for expansion. Continue assembling the floor until the entire room is covered.

Step 4: Installing the Trim

Once the floor is assembled, you can install the trim. Start by measuring the walls and cutting the trim to size. Then, use a hammer and nails to secure the trim to the walls. Make sure to leave a gap of about 5 mm between the trim and the wall for expansion. Once the trim is installed, you can move on to the next step.

Step 5: Applying the Sealant

Once the trim is installed, the next step is to apply a sealant. This will help protect the floor from water damage and make it easier to clean. Start by mixing the sealant according to the instructions on the package, then apply it to the floor using a paint roller. Make sure to cover the entire floor, paying special attention to the gaps between the planks. Allow the sealant to dry completely before moving on to the next step.

Step 6: Finishing Touches

Once the sealant is dry, you can add the finishing touches to your new floor. Start by applying a coat of wax to the floor, which will help protect it from scratches and stains. Then, use a vacuum to remove any dust or debris. Finally, you can add area rugs and furniture to the room to finish it off.

Conclusion

Installing vinyl laminate flooring is a great way to update and refresh the look of your home. It’s easy to install and maintain, and can last for years if properly cared for. By following the steps outlined in this guide, you’ll be able to install your new floor quickly and easily.