Are you planning to install laminate flooring in your home? If so, you’ll need the right tools to make your project a success. In this article, we’ll go over some of the essential laminate floor tools you’ll need for the job.
Tapping Block and Pull Bars
The tapping block and pull bars are two of the most important tools for installing laminate flooring. The tapping block is used to secure planks together and even out the surface. The pull bars are used to pry apart planks when necessary and to avoid damaging the flooring.
Floor Spacers
Floor spacers are used to keep the planks properly spaced during installation. They come in a variety of sizes and are made of plastic or metal. You’ll need to use floor spacers when you’re installing laminate flooring to ensure that the planks are properly spaced and that the ends of the planks don’t come into contact with each other.
Circular Saw
You’ll need a circular saw to cut the planks to fit the room. Make sure to use a carbide-tipped blade for laminate flooring. The blade should have a minimum of 80 teeth, and you should use a slow speed setting to reduce chipping. You can rent or purchase a circular saw from a home improvement store.
Jigsaw
You may also need a jigsaw to cut the planks to fit around door frames or other obstacles. A jigsaw is a hand-held power saw with a blade that reciprocates up and down. You’ll need to use a blade designed for laminate flooring and make sure to use a slow speed setting.
Safety Gear
It’s important to protect yourself when you’re working with sharp tools and heavy planks. Make sure to wear safety glasses and a dust mask when you’re cutting and hammering. You should also wear work gloves to protect your hands from splinters and sharp edges.
Conclusion
Installing laminate flooring requires the right tools. Make sure you have the essentials, such as a tapping block, pull bars, floor spacers, a circular saw, and a jigsaw. Don’t forget to wear safety gear when you’re working with the tools and planks.
Related Posts
